Cryogenic vacuum pumps
COOLVAC i vacuum pumps are refrigerator cryo pumps which generate a vacuum when gaseous substances are bound to the cold surfaces within the pump by means of cryo-condensation. They are used for the generation of ultra-high vacuum.
Because of their pumping principle COOLVAC i cryo pumps have a high effective pumping speed for all gases. COOLVAC i vacuum pumps produce a hydrocarbon free vacuum in the pressure range from 10-3 mbar to 10-11 mbar.
The entire COOLVAC i cryogenic pumps range is equipped with all safety related components, particularly with a safety valve which is equipped with an additional DN 40 KF flange for the connection of an exhaust line.
The pump’s body is made of high-quality stainless steel.
Helium compressors from the COOLPAK i range are required for operating the COOLPOWER i cold heads, which are incorporated within the COOLVAC i range of cryo pumps.
The cryo pumps from the iSmartLine (iSL) range are gradually heated up to room temperature by means of electrical heaters at both cold head stages. Pressure, temperature and heating power are monitored by the COOL.DRIVE i controller.
During the process the pumped gases are released one after the other in the following sequence:
The benefit of Leybold’s regeneration process described above is that no additional purge gas is required during the regeneration of inert, unreactive gases.
Purge gas regeneration is available as additional option/accessory.
In the case of cryo pumps from the iBasicLine (iBL) range, regeneration takes place manually in two sub-steps:
The iBasicLine pumps are identical to the COOLVAC i cryo pumps of the iSL version when it comes to:
However those models do not include the COOL.DRIVE i controller as well as heaters, gauges and fore vacuum valve.
The COOLVAC iSL can be automatically controlled by combination with the compact COOL.DRIVE i controller and the MK5 controller of the COOLPAK i compressors.
The controller is easy to operate for a rapid, reliable and clean regeneration with the high performance, low vibration and energy efficient COOLPOWER i cold heads and compressors of the respective i series.
With three operation modes - boost, eco or standard - for fast cool down, energy saving or standard operation via communication with the COOLPAK i compressor
Integrated in these cryo pumps are safety valves according to the EN 4126 standard.
The maintenance of the COOLVAC i vacuum pumps is equally fast and simple:
The COOLVAC i cryo pumps are a perfect choice for everyone who requires highly effective pumping speed of all gases and water vapor in particular.
The cryo pumps from both the iBasicLine as well as the iSmartLine range are available in suction capacity classes from 1500 l/s to 60000 l/s.