Production / People Image Pictures

How do I know which vacuum pump is right for me?

February 1, 2021

5 MIN READ

Factors to consider when choosing vacuum pumps

When the time comes to select a new vacuum pump, it's important to take a thoughtful approach. At first glance, it might seem like a simple task, but there are several factors to consider. 

Various factors affect a vacuum pump’s overall efficiency and capabilities. Each pump requires its own process conditions, has its own operating range, and offers its own set of benefits and limitations. These characteristics depend on four factors: 

  • Vacuum level

  • Process or application impact on pump  

  • Pump impact on process or application

  • Cost and maintenance 

Vacuum level

Vacuum level is perhaps the most critical consideration as it affects each of the other factors. 
Typical classifications and ranges include:

  • Rough vacuum: from from 10 3 mbar to 1 mbar 

  • Medium vacuum: 1 mbar to 10 -3 mbar

  • High vacuum: 10 -3 mbar to 10 -7 mbar 

  • Ultra-high vacuum: 10 -7 mbar to 10 -12 mbar

  • Extreme high vacuum: less than 10 -12 mbar 

Different pump technologies are required to achieve different vacuum pressure ranges. Depending on the target vacuum level, a mix of different vacuum pump technologies might be necessary.

Forevacuum pumps — those operating in the rough and medium vacuum ranges — exhaust to the atmosphere and can operate in isolation.  

High and ultra-high vacuum pumps — such as turbopumps and diffusion pumps — need to exhaust to, or operate with, a forevacuum pump.

Ion, non-evaporable getter pumps, and cryopumps need initial evacuation and occasional forevacuum and high vacuum pump support at certain stages.  

Related: Brush up on the unique demands of working with high vacuum ranges on this resource page by Vacuum Science World, The Fundamentals of High, Ultra-High & Extreme High Vacuum. Or, check out this guide by Vacuum Science World, to Understand the Different Types of Vacuum Pumps in more detail.

Vacuum ranges

Process or application impacts on pumps

The way processes can impact pumps plays a significant role in selection. The impact of the application on the selected pump technology needs to be evaluated carefully, as well as the potential impact of:

  • Dust or debris from the process 

  • Corrosive gases like chlorine or acidic mixtures in the presence of water vapor

  • High gas throughputs 

  • Frequent ventings

  • Mechanical movements and shocks 

  • Vibrations

  • Heat radiation on the pump 

  • Particle or X-ray radiation

  • Magnetic and electric fields 

As an example, rotary vane pumps are well-suited for many low and medium vacuum applications, such as:

  • Research and development 

  • Analytical instruments

  • Industrial and coating activities 

  • Freeze drying

  • Process engineering  

On the other hand, scroll pumps provide hydrocarbon-free vacuums by compressing gases using two tip-sealed spirals rotating eccentrically against each other. This results in low operation and maintenance costs. 

Compared to RV pumps, scroll pump applications are mainly limited to processes without dust or dirt that could damage the tip seals. 
 
Related: Learn more about the evolution of freeze drying in the food industry on our resource page, Vacuum Pumps and Freeze-Drying Technology

Pump impact on processes or applications

Evaluating the impact of the vacuum pump on the application or process is just as important. Several variables can influence vacuum pump choice, including — but not limited to: 

  • Oil or hydrocarbon emissions or backstreaming  

  • Vibrations produced/induced by the pump 

  • Noise 

  • Magnetic fields produced by the pump (rare) 

  • Heat emission 

  • Energy consumption 

Rotary Vane pumps are at a disadvantage because they cannot generate a hydrocarbon-free vacuum due to oil vapor emission.  

On the other hand, while capable of producing a hydrocarbon-free vacuum, scroll technology carries the risk of particle emission due to tip seal wear.  
 
Related: Check out this blog post with 5 Quick Facts About Noise Pollution in Your Lab, that can help keep you and your team safe.  

Cost and maintenance

Beyond initial capital costs, there is cost associated with operation and maintenance or service. 

Diffusion pump operation is likely much more expensive when compared with a turbomolecular pump. Also, the cost of ownership over five years also includes factors like higher energy and maintenance costs. 

Diffusion pumps can deal with dirtier, industrial processes, whereas turbo pumps are used mainly in clean processes. 
 
Related: Calculate and compare the total cost of ownership between wet and dry vacuum technology with our free online calculator. Click the button below and see how much you could save when using dry vacuum technology.  

Vacuum pump options

There are two overarching categories of vacuum pumps: forevacuum pumps and high vacuum pumps.

Forevacuum pumps

Forevacuum pumps exhaust directly to atmospheric pressure. They include:

  • Rotary vane pumps

  • Scroll pumps

  • Diaphragm pumps

  • Screw pumps

Related: Check out this blog post for 5 Tips to Make Your Rotary Vane Pumps Last Longer.  
 

Secondary pumps

Secondary pumps rely on primary pumps to continuously support their operation as they cannot exhaust atmosphere, and require a low pressure at their exhaust, known as "backing."

Continuously supported (backed) high vacuum pumps include turbomolecular and diffusion pumps.

Ultra-High vacuum pumps include ion getter, titanium sublimation, non-evaporable getter, and cryogenic pumps. 

Roots blower pumps are often combined with forevacuum pumps to act as a pump pair, but they are strictly classified as secondary pumps, as they are not designed to be used without a forevacuum pump. 

Related: Explore our range of turbomolecular pumps on our resource page, introducing the Leybold TURBOVAC i.

Final thoughts

Making the right pump choice for effective vacuum generation requires an understanding of how pumps impact processes — and how processes impact pumps. Vacuum level needs, cost, and maintenance also impact vacuum pump choice. 

Choosing the wrong pump can be expensive and potentially damaging to your operation if the pump doesn't perform as required. A quick chat with our team can help you avoid those pitfalls and advise on which pumps best suit your requirements. Click the button below and start the conversation — we're always happy to lend a hand! 

Leak Detection - banner

Leak detector 101

Download our e-Book "Fundamentals of Leak Detection" to discover leak detection essentials and techniques.

Leybold employee

Let's talk

We focus on customer proximity. Contact us for all your questions.

Contact us

Loading...